S3C72K8: Unterschied zwischen den Versionen
K (Chessguru verschob die Seite SAMSUNG SAM 47 S3C72K8 nach S3C72K8) |
Keine Bearbeitungszusammenfassung |
||
Zeile 1: | Zeile 1: | ||
The S3C72K8 | The S3C72K8 singlechip CMOS microcontroller has been designed for high performance using Samsung's newest 4-bit CPU core, SAM48 (Samsung Arrageable Microcontrollers). With a two-channel comparator, up-to-320-dot LCD direct drive capability, 8-bit timer/counter, watchdog timer and serial I/O, the S3C72K8 offers an excellent design solution for a wide variety of applications which require LCD functions.Up to 27 pins of the 80-pin QFP package can be dedicated to I/O. Seven vectored interrupts provide fast response to internal and external events. In addition, the S3C72K8's advanced CMOS technology provides for low power consumption and a wide operating voltage range. | ||
320-dot LCD direct drive capability, 8-bit timer/counter, watchdog timer and serial I/O, the S3C72K8 offers an excellent design solution for a wide variety of applications which require LCD functions. | |||
Up to 27 pins of the 80-pin QFP package can be dedicated to I/O. Seven vectored interrupts provide fast response to internal and external events. In addition, the S3C72K8's advanced CMOS technology provides for low power consumption and a wide operating voltage range. | |||
'''OTP''' | '''OTP''' |
Version vom 31. Juli 2021, 19:09 Uhr
The S3C72K8 singlechip CMOS microcontroller has been designed for high performance using Samsung's newest 4-bit CPU core, SAM48 (Samsung Arrageable Microcontrollers). With a two-channel comparator, up-to-320-dot LCD direct drive capability, 8-bit timer/counter, watchdog timer and serial I/O, the S3C72K8 offers an excellent design solution for a wide variety of applications which require LCD functions.Up to 27 pins of the 80-pin QFP package can be dedicated to I/O. Seven vectored interrupts provide fast response to internal and external events. In addition, the S3C72K8's advanced CMOS technology provides for low power consumption and a wide operating voltage range.
OTP
The S3C72K8 microcontroller is also available is OTP (one time programmable) version, S3P72K8. S3P72K8 microcontroller has an one-chop 8 Kbyte one time programmable EPROM instead of masked ROM. The S3P72K8 is comparable to S3C72K8, both in function and in pin configuration.
Features
- Memory
- 8 K x 8-bit RAM
- 1,024 x 4-bit ROM
- 27 I/O Pins
- Input only: 4 pins
- I/O: 15 pins
- Output: maximum 8 pins for 1-bit level output (sharing with segment driver outputs)
- Comparator
- Two channel mode: internal reference (4-bit resolution)
- One channel mode: external reference
- LCD Controller/Driver
- 40 segments and 8 common terminals
- 3, 4 and 8 common selectable
- Internal resistor circuit for LCD bias
- All dot can be switched on/off
- 8-Bit Basic Timer
- 4 interval timer functions
- Watchdog timer
- 8-Bit Timer/Counter
- Programmable 8-bit timer
- External event counter
- Arbitrary clock frequency output
- External clock signal divider
- Serial I/O interface clock generator
- 8-Bit Serial I/O Interface
- 8-bit transmit/receive mode
- 8-bit receive only mode
- LSB-first or MSB-first transmission selectable
- Internal or external clock source
- Bit Sequential Carrier
- Support 16-bit serial data transfer in arbitrary format
- Watch Timer
- Timer interval generation: 0.5 s, 3.9 ms at 32,768 Hz
- Four frequency outputs to BUZ pin
- Clock source generation for LCD
- Interrupts
- Three internal vectored interrupts: INTB, INTT0, INTS
- Four external vectored interrupts: INT0, INT1, INT4, INTK
- Two quasi-interrupts: INT2, INTW
- Memory-Mapped I/O Structure
- Data memory bank 15
- Two Power-Down Modes
- Idle mode (only CPU clock stops)
- Stop mode (main system oscillation stops)
- Subsystem clock stop mode
- Oscillation Sources
- Crystal, ceramic, or External RC for system clock
- Main system clock frequency: 0.4 MHzâ€âCœ6 MHz
- Subsystem clock frequency: 32,768 kHz
- CPU clock divider circuit (by 4, 8, or 64)
- Instruction Execution Times
- 0.67 us at 6 MHz (minimum)
- 0.95 ms at 4.19 MHz (minimum)
- 122 ms at 32,768 kHz (minimum)
- Operating Temperature
- â€âCœ 40 °C to 85 °C
- Operating Voltage Range
- 2.0 V to 5.5 V
Package Type
- 80-pin QFP