SPLB32A

aus Schachcomputer.info Wiki, der freien Schachcomputer-Wissensdatenbank
Die druckbare Version wird nicht mehr unterstützt und kann Darstellungsfehler aufweisen. Bitte aktualisiere deine Browser-Lesezeichen und verwende stattdessen die Standard-Druckfunktion des Browsers.

The SUNPLUS SPLB32A, an 8-bit CMOS microprocessor, contains 1216 bytes working RAM, 512K bytes ROM, 8 I/Os, interrupt/wakeup controller, UART for serial communication and Serial SRAM interface for memory expansion, and automatic display controller/driver for LCD. It also features one PWM/DAC driver with two audio channels to produce attractive sound effects easily. Its large ROM area can be used to store both program and audio data. The built-in UART speeds up data transmission between two devices. Furthermore, a SLEEP (power-down) function is also built in to extend power life. The SPLB32A is designed with SUNPLUS state-of-the-art technology to fulfill LCD application needs, especially for hand-held products.

FEATURES

  • Built in 8-bit processor
    • 1216 bytes SRAM
    • 512K bytes ROM
    • Max. operating speed: 4.0 MHz @ 2.4V - 3.6V / 5.0 MHz @ 3.6V - 5.5V
    • Programmable CPU clock: /1, /2, /4, /8, /16, /32, /64 of ROSC Frequency.
    • 6 wake-up sources
    • 7 interrupt sources
  • Universal Asynchronous Receiver and Transmitter (UART)
  • Serial SRAM interface
  • Key scan function
    • SEG[15:0] can be used to send key scan output
  • Programmable LCD driver
    • 74 segments, 16 commons, maximum 1184 dots or 64 segments, 32 commons, maximum 2048 dots
    • 1/5, 1/6 bias; 1/16, 1/32 duty capability
    • 296 bytes dedicated LCD RAM
    • Built-in voltage regulator to generate VLCD for LCD driver
    • 32-level contrast control (2.45V - 5.75V, in 1/5 bias)
    • 32-level contrast control (2.95V - 6.85V, in 1/6 bias)
  • Power saving SLEEP mode
  • Low Voltage Detector
    • 8-level 2.9V - 2.2V/4.35V - 3.3V detection
    • 2.2V Low voltage reset
  • Low power consumption:
    • 600μA typical @ 3.0V, FCPU = 1.0MHz, FOSC = 4.0MHz
    • 25μA typical halt current @ 3.0V
    • <1μA typical standby current @ 3.0V
  • Peripherals
    • Max. 28 I/O pins (PA[7:0], PB[5:0], PC[7:0], PD[5:0])
    • Dedicated I/Os: PA[0:5]
    • Shared pin I/Os:
      • PA[6:7] / SEG[63:62]
      • PC[0:1] / SSRAM SCK, SDA/SEG[61:60]
      • PC[3:2] / UART Tx/Rx
      • PC[4:7] / SEG[73:70] / COM[25:22]
      • PB[0:5] / SEG[69:64] / COM[21:16]
      • PD[0:5] / COM[31:26]
    • 32.768KHz oscillator circuit for RTC
    • RC-oscillator (only one resistor is needed)
    • Two 16-bit reloadable timer/counters
    • 8-bit DAC resolution, 2-channel PWM/DAC audio outputs
    • Watchdog Timer for reliable operation
  • Wide operating voltage range:
    • 2.4V - 3.6V
    • 3.6V - 5.5V